2018 HONDA CR-V1.6L Diesel

This Honda CR-V presents a clean and stable MOT history, with no defects recorded across its four most recent tests, including the July 2025 examination at 47,616 miles. The consistent pass rate suggests the vehicle has been well-maintained under routine inspection, with no signs of recurring mechanical failures or structural concerns. The absence of advisories or minor faults in any of the tests further indicates that basic consumables—such as tyres, wiper blades, and brake pads—have been addressed proactively. Given the low mileage for its age, wear on high-friction components like brake discs, clutch, and suspension bushes is likely to be minimal, though a thorough pre-purchase inspection would still be prudent to confirm no deferred repairs were overlooked. The mileage progression reveals a notably low annual average of around 5,952 miles, which is well below the UK fleet average for a vehicle of this age. Between the June 2022 test at 24,410 miles and the July 2025 test at 47,616 miles, the car accumulated just over 23,000 miles in three years—a pace that implies either infrequent use or extended periods of inactivity. Such low mileage reduces typical wear on drivetrain components, but it also raises the possibility of fluid degradation, such as in the brake system or differential, which can occur even with minimal driving. The consistent annual testing pattern suggests the previous owner adhered to MOT deadlines rigorously, though the lack of recorded defects offers little insight into whether intermediate servicing was performed. For a prospective buyer, the primary focus should be on components not routinely checked during MOTs, such as the suspension geometry, coil springs, and anti-roll bar bushes, which may have degraded even with low mileage due to age-related fatigue. The rear brakes should be inspected for binding or uneven wear, as the MOT history provides no evidence of recent brake system attention beyond passing inspections. Structural corrosion, particularly around wheel arches, sills, and underbody panels, should be scrutinised, given the vehicle’s age and the potential for moisture ingress during periods of disuse. Finally, fluid levels—including brake fluid, engine oil, and coolant—should be checked, as stagnation can lead to seal deterioration or contamination even in a lightly driven vehicle.