1990 Reliant Rialto 0.8L Petrol · H113 HVW
1990 Reliant Rialto (0.8L, petrol). First registered 06 Aug 1990. Recorded mileage 17,187 miles. MOT expired on 13 Jul 2025.
- Make & Model
- RELIANT RIALTO
- Year / Origin
- 1990 · Bournemouth
- Safety Recall
- Unknown
- MOT Status
- Expired on 13 Jul 2025
- Road Tax
- —
- Recorded Mileage
- 17,187 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 0.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
H113 HVW Key Findings
- 2 MOT tests recorded
- Latest MOT passed on 15/07/2024
- 17,187 miles recorded at latest MOT
- 1 historical MOT failure
- 2 defects noted at the latest MOT
- Recurring tyres items (3 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
H113 HVW MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
2 MOT tests are recorded for this 1990 Reliant Rialto (H113 HVW) between July 2024 and July 2024.
The record contains 1 pass and 1 failure.
The most recent test on 15 July 2024 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Tyres (3 issues), Brakes (2 issues), Exhaust & Emissions (2 issues), Lighting (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 4 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Front Tyre not fitted in accordance with side wall instructions trailer use only (5.2.3 (i))”; “Offside Rear Tyre not fitted in accordance with side wall instructions trailer use only (5.2.3 (i))”; “Nearside Rear Tyre not fitted in accordance with side wall instructions trailer use only (5.2.3 (i))”.
H113 HVW Mileage History
- 08/07/202417,176 mi
- 15/07/202417,187 mi+11 mi
Average of roughly 566 miles per year across 2 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Reliant Reliant Rialto
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: RELIANT RIALTO
Known issues reported by owners and MOT testers.
- Front Suspension Swing-Arm and Steering Bush Wear(Moderate)
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head Warpage(Moderate)
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate Corrosion(Moderate)
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (H113 Series)
Vehicles registered in the same regional DVLA batch as H113HVW.
MAZDA
MX-5
MAZDA
EUNOS
VOLKSWAGEN
GOLF
FORD
KUGA
BMW
Z1
ROVER
MINI
TOYOTA
HILUX
MAZDA
ENOS
NISSAN
FIGARO
LAND ROVER
DEFENDER
HARLEY DAVIDSON
FXR
FORD
ESCORT
RELIANT RIALTO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1990 model year cars.
- Front Suspension Swing-Arm and Steering Bush WearModerate
The single front wheel on the Rialto is mounted on an unsprung leading/trailing swing-arm arrangement carrying the full weight of braking and cornering. Road potholes and speed cushions accelerate wear on the front pivot needle roller bearings and steering headstock bushes. Neglected grease lubrication leads to excessive slack, causing vagueness in the steering, front tyre scuffing, and severe MOT failure.
- HT-E High-Compression Cylinder Head WarpageModerate
In 1984, the Rialto 2 adopted the HT-E (High Torque Economy) engine featuring a modified cylinder head running a high 10.5:1 compression ratio and distinct yellow rocker cover. The high compression puts increased thermal stress on the thin alloy cylinder head. If the cooling system develops limescale buildup or the electric fan fails, the head quickly overheats and warps, blowing the head gasket between cylinders two and three.
- Rear Leaf Spring Shackle and Mounting Plate CorrosionModerate
Although the Rialto's main chassis rails were galvanised from the factory, the rear suspension mounting plates, spring shackle pins, and steel U-bolts were not galvanised to the same thickness. Electrolytic reaction between dissimilar metals and road salt causes heavy corrosion around the rear spring eyes. Worn rubber bushes allow the spring leaves to twist, causing axle tramp under acceleration and unpredictable rear-end breakaway.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.