1997 Peugeot 306 1.9L Diesel · R28 EDM
1997 Peugeot 306 (1.9L, diesel). First registered 19 Sept 1997. Recorded mileage 185,142 miles. MOT status: Failed.
- Make & Model
- PEUGEOT 306
- Year / Origin
- 1997 · Reading
- Safety Recall
- Unknown
- MOT Status
- Failed
- Road Tax
- —
- Recorded Mileage
- 185,142 mi
- ULEZ Compliance
- Non-Compliant (Pre-Euro 6 Diesel)
- Fuel & Engine
- Diesel · 1.9L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
R28 EDM Key Findings
- 1 MOT test recorded
- Latest MOT failed on 26/10/2022
- 185,142 miles recorded at latest MOT
- 1 historical MOT failure
Derived directly from the recorded DVSA and DVLA data shown on this page.
R28 EDM MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
1 MOT test are recorded for this 1997 Peugeot 306 (R28 EDM) between October 2022 and October 2022.
The record contains 0 passes and 1 failure.
The most recent test on 26 October 2022 was a fail; the vehicle has not passed its last recorded MOT.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 306
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Poor
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 306
Known issues reported by owners and MOT testers.
- Rear Torsion Beam Radius Arm Bearing Failure(Serious)
Like other classic Peugeots of this era, the 306 rear suspension relies on a transverse torsion beam with trailing arms riding on internal needle roller bearings. Over UK winters, moisture and road salt breach the outer rubber seals, causing the ungreased needle bearings to disintegrate and machine grooves into the axle tube journals. As the bearings collapse, the rear wheels tilt sharply inward at the top (heavy negative camber). Left unaddressed, the inner tyre sidewall cuts into the metal wheel tub.
- Heater Matrix Coolant Leak into Footwell(Moderate)
The heater matrix core tucked behind the centre dashboard console is prone to corrosion and plastic tank seam failure. As the core leaks, hot engine coolant drips directly onto the front passenger carpet and air ducting. In addition to losing engine coolant, the escaping ethylene glycol causes an oily, greasy film on the windscreen that cannot be cleared by wipers or demister fans. Replacing the matrix requires comprehensive dashboard removal, making labour costs high.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (R28E Series)
Vehicles registered in the same regional DVLA batch as R28EDM.
TESLA
MODEL Y LONG RANGE AWD
HYUNDAI
TUCSON
HYUNDAI
KONA N LINE EV
HYUNDAI
I20 BLACK LINE T-GDI AUTO
KIA
PROCEED GT-LINE ISG
BMW
M3
HYUNDAI
SANTA FE ULTIMATE PHEV AUTO
MINI
COOPER
VOLKSWAGEN
T-ROC
SEAT
IBIZA FR SPORT ECOTSI
AUDI
Q2
LAND ROVER
RANGE ROVER VELAR
PEUGEOT 306 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1997 model year cars.
- Rear Torsion Beam Radius Arm Bearing FailureSerious
Like other classic Peugeots of this era, the 306 rear suspension relies on a transverse torsion beam with trailing arms riding on internal needle roller bearings. Over UK winters, moisture and road salt breach the outer rubber seals, causing the ungreased needle bearings to disintegrate and machine grooves into the axle tube journals. As the bearings collapse, the rear wheels tilt sharply inward at the top (heavy negative camber). Left unaddressed, the inner tyre sidewall cuts into the metal wheel tub.
- Heater Matrix Coolant Leak into FootwellModerate
The heater matrix core tucked behind the centre dashboard console is prone to corrosion and plastic tank seam failure. As the core leaks, hot engine coolant drips directly onto the front passenger carpet and air ducting. In addition to losing engine coolant, the escaping ethylene glycol causes an oily, greasy film on the windscreen that cannot be cleared by wipers or demister fans. Replacing the matrix requires comprehensive dashboard removal, making labour costs high.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.