2018 Volkswagen Crafter 2.0L Diesel · AF68 YRX

The Volkswagen Crafter presents as roadworthy following its most recent MOT pass on 21 October 2025 at 122,003 miles with no defects recorded. The maintenance trend appears stable on paper, though the test history shows a recurring pattern of same-week failures immediately preceding passes, with no advisories or defects logged on any attempt. This suggests administrative or presentation issues at the testing station rather than progressive mechanical deterioration. The van has covered 122,003 miles over roughly eight years, averaging about 15,250 miles annually, which is high for a 2018 model and points to sustained commercial use. Mileage jumped from 83,651 at the October 2023 pass to 104,209 by the November 2024 failure, then to 121,997 by the October 2025 failure, showing consistent yearly accumulation of around 18,000 to 19,000 miles. The record is sparse, with only five entries and no advisories, so the data gives limited insight into wear on consumables or structural components between tests. The back-to-back fail-pass pairs on 5 to 6 November 2024 and 15 to 21 October 2025, both with zero defects listed, imply the vehicle was presented without a valid certificate or with minor non-mechanical matters resolved same week. A buyer should still inspect the suspension bushes, coil springs, brake discs and calipers for binding, and check the chassis and underbody for corrosion given the mileage and age. The absence of recorded advisories does not confirm freedom from wear, only that testers logged none. Given the high mileage and repeated same-week retests, verify the V5C, service history, and actual test certificates rather than relying on the summary. A pre-purchase inspection should prioritise drivetrain condition, tyre tread depth, and exhaust emissions against the expected load use of a Crafter at this mileage.