2005 Toyota Aygo 1.0L Petrol · AP55 LOA

The vehicle most recently passed its MOT on 6 March 2025 with no recorded defects. An analysis of the historical data suggests a stable but reactive maintenance trend, where failures are typically addressed immediately prior to the test. There is a notable recurrence of electrical faults, specifically regarding the indicator switch and various lamps, which indicates a pattern of minor component failure rather than systemic mechanical neglect. With a recorded mileage of 111,932 miles over twenty-one years, the vehicle has averaged approximately 5,330 miles per year. This is considerably low for a vehicle of this age and type. While lower mileage generally implies less wear on the engine and drivetrain, it often suggests periods of inactivity or frequent short-distance urban journeys. Such usage patterns can lead to accelerated degradation of rubber components and potential carbon deposits within the engine. Prospective buyers should pay close attention to the wheel bearings, as the offside front unit was a point of failure in 2024 and an advisory in 2023. During a test drive, listen for a rhythmic droning or humming noise that changes pitch when steering or increasing speed. The indicator switch has been a recurring failure point across several years, so ensure the stalk operates smoothly and consistently. Additionally, given the 2022 advisory for thin brake pads, verify the current remaining friction material and check for any brake shudder or uneven pedal feel. Due to the vehicle age and low annual usage, a physical inspection should focus on time-based degradation. Check all tyre sidewalls for perishing or hairline cracking, as rubber hardens over time regardless of tread depth. Inspect the brake discs for heavy surface corrosion or binding calipers that may have resulted from the car standing. It is essential to verify the service history for calendar-based fluid changes, specifically the engine oil and brake fluid, as these degrade chemically over time. Finally, ensure the boot lid is securely fastened and operates correctly following its previous failure.