2015 Audi A5 2.0L Diesel · AS04 NEJ

The vehicle remains roadworthy, but the maintenance trend shows a shift from clean inspections to developing component wear. While it passed the latest test in November 2025 at 111,299 miles, the tester flagged multiple advisories that were not present in the previous 2024 tests. This indicates that the vehicle is entering a phase where suspension and rubber components require proactive attention, moving away from the period of relative stability seen two years ago. The mileage pattern is remarkably consistent for an eleven-year-old vehicle, averaging approximately 10,000 miles per year. There is a steady progression between the June 2022 test at 79,642 miles and the November 2025 test at 111,299 miles, showing an increase of roughly 31,600 miles over three years. This usage regularity suggests regular road use rather than long periods of standing, which is generally beneficial for engine seals and preventing the type of corrosion often associated with stationary vehicles. A buyer must focus their physical inspection on the recurring suspension and damping issues. The offside rear shock absorber has shown light misting of oil since June 2022 at 79,642 miles, a condition that has persisted for 31,000 miles and suggests a seal nearing failure. Furthermore, the worn nearside and offside front suspension arm bushes flagged in late 2025 are developing faults. While not yet causing excessive movement during the test, these bushes will likely degrade handling and cause uneven tyre wear if not replaced before the next major service interval. The braking system and tyres also require a close look. The 2023 record noted thin rear pads and worn front discs, so the buyer should verify if these were replaced during the clean 2024 tests. The November 2025 advisory also highlighted cracking or perishing on both the offside rear and nearside front tyres. Given the age of the car, this rubber degradation indicates dry rot rather than simple tread loss, meaning that the tyres may need immediate replacement to ensure structural integrity and grip.