2022 Vauxhall Crossland Ultimate Turbo D A 1.5L Diesel · AX22 APU

The latest MOT test for this Vauxhall Crossland Ultimate Turbo D A, conducted on 2025-11-07, resulted in a clean pass with no defects recorded, marking a positive outcome following the previous two tests. The maintenance history over the past year is stable, with no evidence of worsening mechanical issues or repeated failures. The absence of critical faults and the consistent passing of MOTs suggest that the vehicle has been maintained within acceptable standards, though the advisories noted in the earlier tests indicate areas requiring closer attention to prevent potential future roadworthiness concerns. The recorded mileage of 29,872 miles for a vehicle aged four years represents a reasonable annual usage rate of approximately 7,468 miles per annum, aligning with typical driving patterns for its class. This level of mileage is neither excessively light nor overly aggressive for its age, but it does not rule out potential wear accumulation in certain components. The absence of significant mileage gaps or rapid mileage accumulation suggests that the vehicle has been driven consistently, which could contribute to more uniform wear across components like brakes, tyres, and suspension. However, the advisories on the rear brake discs and tyres warrant further scrutiny, as they may indicate underlying issues that could escalate with continued use. For the prospective buyer, the advisories on the rear brake discs—both near-side and off-side—being worn, pitted, or scored but not seriously weakened—demand immediate inspection. These discs should be visually examined for signs of uneven wear, which could suggest brake rotor warping, excessive heat exposure, or hydraulic system irregularities. During a test drive, listen for unusual brake pedal pulsation or vibration, which may indicate rotor warping or binding calipers. Additionally, check for a soft or spongy pedal feel, which could signal brake fluid degradation or air within the hydraulic system. The rear tyres, particularly the off-side slightly damaged or cracked and the near-side with a shallow cut, should be monitored closely. Uneven tyre wear patterns or further cracking could signal alignment or suspension issues, so verify that the vehicle maintains straight-line stability and that the wheels align correctly. If these issues persist, consider replacing the rear brake discs and tyres promptly to mitigate the risk of reduced braking performance or tyre failure. Beyond the advisories, conduct a thorough physical inspection of the vehicle’s structural and fluid integrity. Given the age and mileage, check the tyre sidewalls for signs of perishing or cracking, which can compromise tyre integrity and safety over time. Inspect the 12-volt battery for corrosion around terminals, a common issue in vehicles that stand for prolonged periods or experience frequent cold starts. Verify that the battery holds a charge and that the alternator is functioning correctly by testing the voltage output under load. Fluid levels should be checked, including the engine oil, brake fluid, and differential/transmission fluid, with particular attention to their condition and colour—degraded fluids may need replacement before they fail catastrophically. Finally, review the service history for any missing or overdue maintenance, such as timing belt replacement (if applicable), suspension component servicing, or exhaust emissions checks, to ensure the vehicle remains compliant and safe for continued use.