2018 Mercedes-Benz GLE 2.1L Diesel · BD18 DPX

This Mercedes-Benz GLE has maintained a consistent MOT history with no defects recorded across the last four tests, most recently passing on 3 October 2025 at 79,723 miles. The absence of advisories or failures suggests the vehicle has undergone regular servicing and has not experienced any recurring mechanical issues that would indicate neglect or imminent failure. However, the most recent test occurred just over nine months ago, which is within the standard 12-month MOT validity period but leaves a gap of nearly three months before the next due date. Buyers should verify whether the vehicle has been serviced in line with the manufacturer’s schedule, particularly for high-mileage components like timing belts, suspension bushes, and fluid changes, as these are not covered by the MOT. The mileage progression shows a steady accumulation of approximately 9,965 miles annually, which is typical for a vehicle of this age and class. There are no abrupt jumps or prolonged periods of inactivity between tests, though the gap between the February 2023 (64,821 miles) and October 2023 (70,238 miles) tests—just eight months—suggests either a pre-MOT service or consistent usage. The lack of advisories or failures in any test implies that previous owners did not delay maintenance or ignore warning signs, though this does not guarantee all hidden wear is absent. Given the clean MOT record, the primary focus for an in-person inspection should be on suspension components—coil springs, bushes, and dampers—given the vehicle’s age and mileage. The brakes, particularly the rear calipers and discs, should be checked for uneven wear or binding, as these are common failure points in high-mileage SUVs. Structural integrity, including underbody corrosion around the sills, wheel arches, and exhaust system, must also be examined, as these areas are prone to deterioration in British conditions. Finally, verify the condition of the exhaust system for leaks or excessive rust, as this is often overlooked but critical for emissions compliance and structural stability.