2015 Fiat 500L 1.4L Petrol · CP15 VHC

The vehicle presents a concerning roadworthiness profile with a maintenance history indicating a pattern of reactive rather than preventative care. While the most recent test in July 2025 at 98,942 miles passed, it followed a failure three days prior due to multiple mechanical and lighting defects. The trend shows a worsening state in suspension and braking components, with recurring issues regarding axle bushes and brake wear across several years, suggesting that components are only addressed when they reach a point of failure. At 98,942 miles over 11 years, the car has averaged approximately 9,000 miles per year, which is consistent with typical UK usage for a small family car. The mileage progression shows consistent annual testing, with roughly 9,000 miles covered between July 2023 and 2024, and another 6,500 miles between July 2024 and July 2025. This steady usage indicates the vehicle has not sat idle, but it explains the progressive degradation of rubber and metal components noted in the records. A buyer must conduct a thorough physical inspection of the front suspension and braking system. The rear axle swivel pins and bushes have appeared as advisories or failures since 2023, indicating significant wear in the rear suspension geometry. Furthermore, the nearside front track rod end was a serious failure in 2024, and the offside front wheel bearing now shows play as of the 2025 test. The front brake discs and pads were flagged as worn and pitted in 2025, suggesting the entire front assembly is nearing its replacement interval. The record also highlights a persistent oil leak noted in 2023 and 2025, which requires a professional inspection to determine if it is a minor seal or a more significant engine leak. The corroded brake pipes identified in 2023 should be re-checked to ensure the corrosion has not progressed since the repair. Given the history of failing exhaust joints and worn-edge tyres, the vehicle likely requires immediate expenditure on consumables to maintain its long-term mechanical integrity.