2015 SEAT Leon 1.4L Petrol · CU15 UDY

The 2015 SEAT Leon presents a stable and improving maintenance trend, culminating in a completely clean pass on 13 February 2026 at 65,730 miles. This most recent test recorded zero defects, indicating the vehicle currently meets all required safety and environmental standards. The maintenance trajectory remains highly consistent, with the tester flagging no recurring mechanical or structural faults across the recorded history. Such a clean record implies the previous owner addressed any minor wear items proactively rather than allowing faults to persist. Evaluating the mileage pattern against its eleven-year age reveals exceptionally light usage, averaging roughly 5,975 miles per year. The recorded intervals show steady, incremental accumulation: 48,957 miles in February 2023, 53,865 miles in February 2024, and 59,855 miles in February 2025. This equates to an average annual increase of approximately 5,000 miles, confirming sustained, low-intensity driving rather than long periods of dormancy. A slight anomaly appears in the 2025 record, where a test on 11 February at 59,852 miles registered a failure despite recording no defects, followed immediately by a clean pass on 12 February at 59,855 miles. This suggests an aborted test or an administrative discrepancy rather than a sudden mechanical failure, as the mileage barely changed and the subsequent test passed cleanly. Despite the flawless MOT history, a physical inspection remains essential due to the specific risks associated with low-mileage vehicles. Extended periods of standing can cause suspension bushes to perish and brake discs to surface corrode, even if the pads retain sufficient thickness. A buyer should closely examine the condition of the tyres, checking for sidewall cracking or flat spots from prolonged stationary periods. Inspect the brake calipers for signs of binding and check the exhaust system for early corrosion, as short trips prevent the system from reaching optimal operating temperatures to burn off accumulated moisture. Underneath, examine the structural integrity of the chassis and subframes for surface rust, ensuring the light usage has not masked any deterioration from standing idle.