2020 Audi Q2 1.5L Petrol · DB13 MAC

The latest MOT test conducted on 23 March 2026 resulted in a pass with no defects recorded. Reviewing the vehicle history since 2023, the maintenance trend is remarkably stable, exhibiting a consistent record of passes. The only noted issue was a minor advisory in 2024 regarding the deterioration of the rear registration plate, which is a superficial matter and does not impact the mechanical integrity of the vehicle. This suggests a car that has been well-maintained or has experienced very little operational stress. With a recorded mileage of 19,151 miles over approximately six years, this Audi Q2 has been used significantly less than the national average, averaging roughly 3,192 miles per year. While this low mileage implies minimal wear on the engine, gearbox, and suspension components, it also suggests the vehicle may have spent extended periods stationary. Such usage patterns can lead to specific degradation issues that are not typically found on higher-mileage examples, shifting the focus from mechanical wear-and-tear to age-related deterioration. Given the clean MOT history and low usage, a physical inspection should prioritise the condition of the rubber components. You must examine the tyre sidewalls for signs of perishing or fine cracking, as tyres can degrade and lose structural integrity over time regardless of the remaining tread depth. Additionally, inspect the brake discs for surface corrosion or pitting and check for binding calipers, which can occur when a vehicle is left standing for long intervals. During the test drive, listen for any unusual brake shudder or uneven deceleration that might indicate glazed pads or uneven disc wear. Particular attention should be paid to the vehicle's service history to ensure that maintenance has been performed according to calendar intervals rather than just mileage. Engine oil and brake fluid degrade over time due to moisture absorption and oxidation, meaning time-based changes are critical for this specific vehicle. You should also verify the health of the 12V battery, as infrequent use or short journeys often prevent a battery from reaching a full state of charge, potentially leading to premature failure. Finally, ensure all service book stamps align with the manufacturer's recommended time-based schedule to guarantee long-term reliability.