2021 Mercedes-Benz Evito Tourer PRO Electric · DC21 ACS

The Mercedes-Benz Vito Tourer Pro has maintained a clean MOT record over the past three tests, with the most recent assessment on 14 October 2025 at 40,853 miles showing no defects or advisories. This consistency suggests a stable maintenance history, with no signs of worsening mechanical issues or neglect. The absence of recurring faults in the DVSA records indicates that major components—such as brakes, suspension, steering, and structural integrity—have passed inspection without intervention. However, the gap of nearly nine months since the last test (due on 14 July 2026) means the vehicle is currently overdue for its next MOT, which could reveal deferred wear if not addressed promptly. The mileage accumulation of 8,171 miles per year aligns with typical usage for a five-year-old vehicle, suggesting neither excessive nor minimal driving. The recorded mileages—15,460 in October 2023, 29,754 in October 2024, and 40,853 in October 2025—show steady, predictable intervals without sudden spikes or prolonged inactivity. This pattern implies the vehicle has been used consistently, though the lower-than-average annual mileage may indicate occasional periods of reduced use or storage. Without advisories or defects in the MOT history, there’s no evidence of forced hard driving or chronic mechanical stress. For a buyer, the primary focus should be on components not covered by the MOT but critical to long-term reliability. Given the absence of recorded issues, particular attention should be paid to the electric drivetrain—specifically the battery health, inverter, and charging system—since these are not routinely inspected under MOT but can degrade over time. The suspension system, including coil springs, anti-roll bars, and bushings, should be checked for wear, as should the brake system beyond the MOT’s basic requirements: inspect for uneven pad wear, fluid condition, and potential binding in the calipers. The vehicle’s bodywork and undercarriage should also be examined for corrosion, particularly around wheel arches, sills, and the rear differential area, as these are common weak points in older vans. Finally, verifying the service history for oil changes, fluid top-ups, and any manufacturer-scheduled maintenance will provide further confidence in the vehicle’s upkeep.