2019 Mitsubishi Outlander 2.0L Petrol · DR03 MSG

The vehicle passed its most recent MOT on 8 June 2026 at 45,316 miles, but the record shows a worsening trend in consumable wear. While the vehicle remains roadworthy, the latest test flagged multiple advisories regarding the braking system and tyres. Specifically, the tester identified worn, pitted, or scored brake discs on both the front and rear axles, alongside front brake pads wearing thin and rear pads reaching their limits. This indicates that the braking components are nearing the end of their service life and require imminent attention. The mileage accumulation appears consistent with a vehicle of this age, averaging approximately 6,500 miles per year. The data shows steady progress from 18,153 miles in February 2022 to the current 45,316 miles in June 2026. This pattern suggests regular, moderate use rather than long periods of inactivity or heavy commercial usage. The intervals between tests are relatively stable, providing a clear chronological view of the vehicle's condition over the last four years. A prospective buyer should focus heavily on the braking system during a physical inspection. The transition from no brake advisories in previous years to widespread disc and pad wear in June 2026 suggests a period of heavy usage or deferred maintenance on these specific components. You should verify if the discs have been replaced recently or if they show significant depth loss. The presence of pitted and scored discs often leads to reduced braking efficiency and increased noise if not addressed. Tyre condition also warrants close scrutiny. The MOT history reveals a recurring issue with tyre degradation, specifically cracking or perishing on the rear tyres, which appeared in February 2023, February 2024, March 2025, and again in June 2026. This persistent advisory suggests the vehicle may be parked in conditions that accelerate rubber perishing or that the owner is delaying tyre replacements. Inspect the sidewalls and tread depth of all four tyres to ensure they meet safety standards and are not showing signs of age-related structural failure.