2017 Mitsubishi Outlander 2.0L Hybrid electric · DS17 NHU

The vehicle is currently roadworthy, but the maintenance trend shows a pattern of deferred repairs regarding wear components. While the most recent test in January 2026 at 77,251 miles passed, it repeated the exact same defects found in the previous year. The persistence of pitted front inner brake discs and worn nearside rear tyres across multiple tests suggests the owner only addresses these issues when they reach an MOT failure or advisory threshold, rather than performing preventative maintenance. At 77,251 miles, this nine-year-old Outlander averages approximately 8,600 miles per year, which aligns with typical UK usage for a large family SUV. The mileage accumulation between tests is consistent, with roughly 2,200 miles covered between January 2025 and January 2026, and approximately 3,500 miles in the year prior to that. This steady usage pattern indicates the vehicle has not been subjected to extreme stress, though the low annual mileage does not prevent age-related degradation of rubber and metal. A buyer must closely inspect the underside to assess the extent of the general corrosion that has been noted consistently since at least 2024. While corrosion has not yet resulted in a structural failure, its presence across three consecutive tests warrants a physical check for thinning metalwork. The track rod end, which failed in early 2025 due to excessive play after being noted for slight play in 2024, should be inspected for further wear to ensure the steering geometry remains accurate and no other suspension components are failing. The braking system requires immediate attention as the front inner discs have been flagged as pitted and scored for two years without replacement. This condition can affect braking efficiency and noise. The nearside rear tyre consistently appearing at the legal limit or worn on the edge may indicate a persistent alignment issue or uneven camber. The buyer should verify the current condition of all four tyres and check the thickness of the brake pads before finalizing the purchase.