2012 Hyundai I20 1.2L Petrol · EO62 AEB

The 2012 Hyundai i20 shows a stable roadworthiness trend with no defects recorded across all MOT tests, including the most recent one on 29 August 2025—just under a year ago. This suggests the vehicle has consistently met DVSA’s minimum standards for brakes, suspension, emissions, and structural integrity. The absence of advisories or repeated failures indicates no recurring mechanical issues were deemed serious enough to warrant a fail or warning. However, the record’s silence does not preclude hidden wear; critical components like suspension bushes, coil springs, and brake calipers—common failure points on this model—require independent verification, especially given the vehicle’s age. The recorded mileage of 68,045 miles over 14 years equates to approximately 4,860 miles annually, a figure significantly lower than the UK average for a car of this age. This pattern suggests the vehicle has either been lightly used or stored for extended periods, which could impact fluid levels, tyre condition, and minor wear items. Notably, there is a 2,630-mile gap between the 2023 and 2022 tests, followed by a 3,420-mile jump to the 2024 tests—both within normal annual variation but worth confirming with the seller. The lack of service history or advisory notes means no proactive maintenance records are available to assess whether fluids (brakes, power steering, coolant) or filters have been changed as recommended. Given the clean MOT history, the primary focus for an in-person inspection should centre on suspension components, particularly the rear subframe and bushes, which are prone to fatigue on this model. Check for uneven tyre wear, which could indicate worn suspension or alignment issues. The brakes—never failed but subject to high mileage—should be inspected for uneven pad thickness, glazed discs, or binding calipers, all of which could escalate into failures. Corrosion is another critical area; examine the wheel arches, sills, and underbody for rust penetration, especially around the rear subframe and exhaust mounts, where structural integrity is compromised. Finally, verify the exhaust system for leaks or excessive corrosion, as emissions systems on this model have occasionally triggered failures in similar-age vehicles.