2018 Mercedes-Benz Sprinter 3.0L Diesel · FJ68 AXD

The Mercedes-Benz Sprinter in question presents a clean and stable MOT history, with the most recent test on 5 August 2025 at 68,920 miles showing no defects—just the third consecutive annual pass without advisories or failures. This consistency extends back to 13 July 2021 , when the vehicle was last tested at 30,601 miles , indicating a well-maintained example with no red flags in structural integrity, emissions, or critical mechanical systems. The absence of recurring advisories suggests previous owners adhered to basic servicing, particularly in areas prone to neglect, such as brakes, suspension, and exhaust. That said, the lack of recorded advisories could also imply minimal scrutiny during tests, so a buyer should treat this as a baseline rather than absolute assurance of hidden wear. Mileage accumulation has been steady and predictable, averaging roughly 8,600 miles per year —well within expectations for a commercial van of this age. The gap between tests is uniform, with each MOT falling within a year of the last, and no sudden spikes or drops in mileage that might suggest prolonged inactivity or heavy use. For instance, the 11,396-mile jump between August 2023 (50,705 miles) and August 2024 (62,101 miles) aligns with typical annual usage, while the 9,314-mile increase from August 2024 to August 2025 reinforces this pattern. There’s no evidence of abuse or neglect in the mileage data, though the low annual mileage could mean some components—like tyres or clutch—may have been underutilised, potentially masking wear. Given the clean MOT record, a buyer should prioritise a thorough inspection of suspension components , particularly the front coil springs and rear shock absorbers , as these are common wear points in vans and often overlooked in basic MOT checks. The brake system —including disc thickness, caliper operation, and pad condition —should be scrutinised, even though no failures were recorded, as binding or uneven wear can develop without immediate MOT detection. Exhaust emissions and DPF health (if diesel) are also worth checking, as modern vans can pass tests despite early-stage faults in these areas. Finally, structural corrosion in high-stress zones like the subframe, wheel arches, and chassis rails should be examined, as rust can compromise safety long before it’s visible in an MOT. The absence of advisories is encouraging, but this vehicle’s true condition hinges on what’s not tested annually.