2018 Honda CR-V 1.5L Petrol · FJ68 XGG

A consistent track record of clean MOT results defines this vehicle, with five consecutive tests showing no recorded defects through to the latest pass on 28 November 2025. The absence of any failures or advisories across the documented history suggests that the primary mechanical systems have met the minimum regulatory standards for roadworthiness without the recorded presence of structural corrosion, brake component wear, or suspension degradation. The recorded mileage of 34,351 miles against an eight-year age profile represents a low annual accumulation of approximately 4,294 miles. While this indicates a lower level of mechanical wear on high-friction components such as the braking system, clutch, and engine internals compared to average usage, such low annual mileage can sometimes correlate with extended periods of inactivity. From a mechanical standpoint, this usage pattern means that while the drivetrain may have low cumulative stress, components that rely on regular movement to maintain seals and fluid circulation should be monitored. Given the lack of recorded advisories regarding suspension or steering, a test drive should focus on detecting any subtle irregularities that may not have triggered an MOT failure. Listen for any rhythmic knocking or clunking sounds when traversing uneven surfaces, which could indicate the onset of wear in suspension bushes or coil springs. Additionally, pay close attention to the steering response for any pulling to one side or vibrations through the steering wheel, as these can be early indicators of alignment issues or uneven tyre wear that often accompany low-use vehicles. The braking system should be evaluated for any pedal judder or sponginess, particularly when decelerating from higher speeds, to ensure the discs and calipers are performing without binding or warping. Since the MOT history shows no recorded oil misting or leaks, check the engine bay and undercarriage for any signs of fluid weeping that might have developed between testing intervals. Ensuring the vehicle operates smoothly without unexpected noises or vibrations will be essential to confirming the mechanical state of a vehicle with this specific usage profile.