2012 Nissan Navara 2.5L Diesel · FN12 NZB

The most recent MOT inspection conducted on 04 January 2024 resulted in a pass with no recorded defects. Reviewing the history from 2021 through to 2024, the vehicle demonstrates a consistent and stable maintenance trend, having secured consecutive passes without any noted advisories or failures. While this indicates a high standard of basic roadworthiness and compliance with minimum safety standards, it is important to remember that an MOT is a snapshot in time and does not reflect the overall mechanical health or the quality of routine preventative maintenance. The recorded mileage of 124,503 miles for a 2012 vehicle represents an average annual usage of approximately 8,893 miles. This level of mileage is entirely typical for a diesel utility vehicle of this age and suggests the vehicle has not been subjected to extreme commercial abuse, nor has it sat idle for excessively long periods which can lead to component seizure. However, at this mileage, the drivetrain, suspension system, and various rubber components are entering a phase of their lifecycle where wear becomes more predictable and significant, necessitating a thorough mechanical inspection. Given the absence of recorded defects, your inspection should focus on age-related degradation and time-based maintenance. Closely examine the tyres for signs of perishing or sidewall cracking, as rubber can degrade due to age even if tread depth remains sufficient. On a test drive, listen for any knocks or clunks from the suspension, which may indicate worn bushes, ball joints, or failing coil springs, and check for any brake shudder or pulling that could suggest warped discs or binding calipers. Inspect the underbody thoroughly for structural corrosion, particularly on the chassis rails and suspension mounting points, which is a common concern for older 4x4 vehicles. Finally, verify the service history to ensure that essential fluid changes, such as engine oil, coolant, and brake fluid, have been performed according to manufacturer intervals, and check the condition of the battery and drive belts to ensure they remain fit for purpose.