2021 KIA Niro 1.6L Hybrid electric · FN71 OAM

The most recent MOT test conducted on 20 October 2025 resulted in a pass with no defects recorded. This follows a similarly clean result from the previous year, indicating a highly stable maintenance trend. The absence of any recorded failures or advisories suggests that the vehicle has been kept in a condition that meets or exceeds the minimum legal safety requirements without the need for corrective repairs between inspections. The recorded mileage of 35,919 miles over approximately five years equates to an annual average of roughly 7,184 miles. This represents a typical usage profile for a vehicle of this age, suggesting a balanced duty cycle that avoids the pitfalls of both excessive wear associated with high-mileage commuting and the degradation often found in vehicles that have spent prolonged periods standing. Mechanically, this mileage suggests that major drivetrain components should still be well within their expected service life. Given the clean MOT history, a prospective buyer should focus on physical inspections that a standard test may overlook. It is essential to examine the tyre sidewalls for signs of perishing or fine cracking, as rubber degrades over time regardless of tread depth. Particular attention should be paid to the brake discs for any surface corrosion or evidence of binding calipers, which can occur if the vehicle has undergone frequent short trips. During a test drive, listen for any subtle knocks or clunks from the suspension bushes or coil springs, which can begin to wear even at moderate mileages. Finally, verify the service history to ensure that calendar-based maintenance has been performed. While the MOT is clean, items such as engine oil, brake fluid, and coolant degrade over time and require replacement based on intervals rather than mileage alone. Check the health of the 12V auxiliary battery, as these can lose efficiency after five years. A thorough review of the service book stamps will confirm whether the vehicle has been maintained according to the manufacturer's schedule, ensuring the long-term reliability of the hybrid powertrain and associated electronics.