2015 Aston Martin Vantage 4.7L Petrol · GP02 AML

The vehicle presents a stable roadworthiness profile following a recent clean pass in December 2025 at 13,219 miles. While the car experienced a failure in November 2023 due to an inoperative engine MIL, a TPMS light, and an oil leak, the subsequent test in December 2023 cleared these issues. The most recent two years of testing show no recorded defects, suggesting that previous mechanical concerns have been addressed and the vehicle is currently maintaining a consistent standard of upkeep. The mileage pattern confirms this is a very low-use vehicle, averaging approximately 1,200 miles per year over its eleven-year lifespan. The data shows significant periods of inactivity, particularly between December 2022 and November 2023, where the mileage only increased by roughly 4,300 miles. This pattern of infrequent use is evident in the historical tyre records. Between 2019 and 2022, the MOT tester consistently flagged all four tyres as perishing or cracking, a common symptom of rubber degradation in high-performance vehicles that sit stationary for long periods. A prospective buyer should focus on the oil leak noted in the November 2023 failure. Although the December 2023 pass indicates the leak was not excessive, the presence of any oil seepage on a high-performance engine warrants a physical inspection of the gaskets and seals to ensure the issue has not recurred. The fact that the engine management light and TPMS issues were resolved suggests recent electrical or sensor maintenance, but verifying the integrity of these systems remains prudent. Given the history of tyre perishing due to low usage, the current age of the rubber should be checked regardless of tread depth. Low-mileage vehicles often suffer from age-related degradation in consumables like tyres, suspension bushes, and seals. Inspect the underside for any signs of fluid weeping and confirm that the recent lack of advisories reflects genuine mechanical health rather than just a lack of scrutiny during the testing process.