2016 Peugeot 108 1.0L Petrol · KF02 ALK

The 2016 Peugeot 108 has maintained a consistent MOT pass record across four consecutive tests, all conducted without any recorded defects or advisories. The most recent inspection on 2025-07-31, at 48,373 miles, confirms the vehicle remains roadworthy under current DVSA standards, with no evidence of recurring mechanical failures. This pattern suggests the car has been subjected to either diligent maintenance or benign operating conditions, though the absence of advisories does not preclude underlying issues requiring closer scrutiny. The recorded mileage of 48,373 miles over nine years—approximately 5,370 miles annually—indicates unusually light usage for a vehicle of this age. The gaps between tests are regular, with no abrupt jumps in mileage, which might imply prolonged storage periods or minimal daily driving. For instance, between the 2022 and 2023 tests, the car accrued just 6,217 miles in 14 months, a rate far below average. While low mileage generally reduces wear on components like suspension bushes and brake calipers, it can also lead to fluid degradation (e.g., brake fluid, coolant) if the vehicle was left stationary for extended periods without servicing. Given the clean MOT history, a buyer should prioritise an inspection of high-wear items that often fail silently or degrade over time, even in low-mileage vehicles. Focus on the suspension system—particularly the front and rear coil springs, bushes, and dampers—for signs of perished rubber or excessive play, as these are prone to deterioration regardless of mileage. The brake system warrants thorough examination, including disc thickness, caliper binding, and master cylinder condition, as moisture accumulation in unused brake fluid can cause corrosion or sponginess. Additionally, check for corrosion at wheel arches, sills, and underbody, as prolonged standing can accelerate rust formation in susceptible areas. The absence of advisories in prior tests is reassuring, but the vehicle’s age—now nearing ten years—demands scrutiny of less obvious wear, such as timing belt tensioners (if applicable), fuel system integrity, and electrical connections prone to oxidation. A pre-purchase inspection by a qualified mechanic is strongly advised to verify the structural integrity of the chassis and body panels, as well as the functionality of critical systems like the exhaust emissions control (if equipped with a DPF or catalytic converter). The lack of recent MOT advisories does not equate to a risk-free purchase; a hands-on assessment remains essential.