2022 KIA Ceed 1.5L Petrol · LD22 SNN

The vehicle most recently passed its MOT on 13 April 2026, though the overall maintenance trend indicates a reactive approach to vehicle upkeep. A significant failure occurred in April 2025 due to a dangerous tyre bulge, and subsequent tests have consistently flagged issues with tyre wear and brake condition. The persistence of advisories regarding brake disc degradation suggests that necessary preventative maintenance has been deferred, indicating a trend of addressing defects only when they reach a critical or legal limit. With a recorded mileage of 41,334 miles over approximately four years, the vehicle has averaged roughly 10,334 miles per annum. This usage rate is considered typical for a car of this age and suggests a balanced duty cycle. Mechanically, this mileage implies that the vehicle is entering a phase where primary consumables, such as brake pads and tyres, will require their first or second major replacement cycle, and the suspension components should be inspected for standard wear and tear associated with average UK road usage. Prospective buyers should pay close attention to the tyre condition and wheel alignment. The history of a structural tyre failure combined with recent advisories for inner edge wear strongly suggests a potential tracking issue or worn suspension bushes. During a test drive, listen for any unusual humming or droning noises from the tyres and visually inspect the inner sidewalls for irregular wear patterns. Furthermore, the tyre pressure monitoring system light is currently flagged as an advisory, which requires a professional diagnostic check to determine if a sensor has failed or if the system simply requires recalibration. The braking system requires thorough scrutiny due to recorded pitting, scoring, and lipping of the discs. You should feel for any shuddering or pulsation through the brake pedal during deceleration, which would indicate warped or heavily lipped discs. Given that these advisories have persisted across multiple tests, it is highly probable that a full set of discs and pads will be required in the immediate future. Finally, verify the service history to ensure that oil changes and filter replacements have been carried out according to the manufacturer's schedule to protect the longevity of the drivetrain.