2016 Toyota Avensis 2.0L Diesel · LR16 MFF

The latest MOT test conducted on 20 August 2025 resulted in a pass with no defects recorded. Reviewing the history back to 2021, the vehicle has maintained a consistently clean record with no failures or advisories listed for five consecutive years. This indicates a very stable maintenance trend and suggests that the previous owner has proactively addressed wear and tear items before they reached a critical failure point, ensuring the vehicle has remained compliant with DVSA roadworthiness standards. The vehicle has covered 137,131 miles over approximately ten years, averaging roughly 13,713 miles per annum. This is considered high usage for a passenger vehicle of this age. While high mileage typically implies accelerated wear on the drivetrain, suspension bushes, and engine internals, the lack of MOT advisories suggests the vehicle has been well-managed. However, a prospective buyer must acknowledge that major components such as the alternator, water pump, and clutch may be approaching the end of their typical service life based on total distance travelled. Given the absence of recorded defects, the inspection should focus on physical wear and age-related degradation. You should closely examine the tyre tread depths and sidewalls for uneven wear or perishing, which could indicate wheel misalignment or aged rubber. Check the brake discs for significant lip formation or scoring and ensure the calipers are not binding. During the test drive, listen for clunks or knocks over uneven surfaces that would suggest worn dampers or perished rubber suspension bushings, as these are common wear items on high-mileage chassis. Verify the service history to ensure that oil changes and filter replacements have been performed at regular intervals, as fluid degradation can impact long-term engine health. Check the condition of the 12V battery and look for signs of oil seepage around the engine gaskets and gearbox seals, which can become prevalent as seals harden with age and mileage. Finally, inspect the underbody for surface corrosion, particularly around the sills and suspension mounting points, to ensure the structural integrity remains intact despite the vehicle's extensive road use.