2011 Chevrolet Cruze 1.6L Petrol · MF11 UAB

The 2011 Chevrolet Cruze presents a mixed maintenance picture, with a worsening trend in suspension wear and a recent advisory on engine management. The most recent MOT, conducted on 14 November 2023 at 50,511 miles, initially failed due to an inoperative engine MIL and deteriorated front lower suspension arm rear bushes on both sides. A retest on the same day passed, suggesting the MIL was rectified, but the suspension advisories remained. This indicates the bushes were not replaced, merely noted as a developing issue. The pattern shows a clear progression from a clean bill of health in November 2022 to a vehicle now carrying known suspension wear. The mileage profile is notably low for a fifteen-year-old vehicle, averaging approximately 3,367 miles per year. The record shows a jump from 37,289 miles in November 2021 to 42,971 miles in November 2022, an increase of 5,682 miles in one year, before plateauing at 50,511 miles by November 2023. This suggests a period of increased use followed by the vehicle standing or being used very sparingly, as the mileage has not advanced since the last test over two and a half years ago. Such long periods of inactivity can contribute to perished rubber components, including the suspension bushes now flagged. A buyer should focus their physical inspection on the front suspension and braking system. The repeated advisories for deteriorated front lower suspension arm rear bushes, present in the most recent test, warrant close examination for play, cracking, or perishing. Given the vehicle's low mileage and potential for standing, the condition of all suspension bushes, coil springs, and shock absorbers should be checked for corrosion and deterioration. The rear brake pads were flagged as wearing thin in 2021 and failed for being below 1.5 mm in 2022, so the current condition of rear pads and discs requires verification. The inoperative engine MIL from the 2023 failure, though rectified, means a diagnostic scan is advisable to check for stored fault codes and confirm the engine management system is functioning correctly.