2019 Volkswagen Amarok 3.0L Diesel · N300 ABR

The vehicle most recently passed its MOT on 12 August 2026 with no recorded defects. While the most recent two tests are clean, the overall maintenance trend reveals a period of instability in 2025, characterized by a failure involving a dangerous tyre structural failure and a major wheel bearing defect. This suggests that while the vehicle is currently roadworthy, there have been instances where critical safety components were allowed to deteriorate to a dangerous level before being addressed. With a recorded mileage of 158,560 miles over approximately seven years, this vehicle has averaged over 22,000 miles per year. This is significantly higher than average usage and indicates a life of heavy duty or long-distance commercial application. Such high mileage accelerates the wear of drivetrain components, suspension bushings, and engine internals. Prospective buyers must recognize that this vehicle is entering a phase where major component fatigue is more likely, necessitating a rigorous review of the service history to ensure preventative maintenance has kept pace with the usage. Particular attention must be paid to the tyres and wheel bearings during inspection. The MOT history shows a recurring theme of tyre perishing and sidewall damage across multiple years, which may indicate poor storage conditions or neglected replacement cycles. During a test drive, listen for a rhythmic humming or droning sound that increases with speed, which would suggest the remaining wheel bearings are beginning to fail. Inspect the tyre sidewalls for any signs of cracking or bulging, and ensure the tread wear is even across the width of the tyre to rule out alignment issues. Given the previous advisories regarding thin rear brake pads and the overall high mileage, a thorough check of the braking system is essential. Inspect the brake discs for deep scoring or lip formation and verify that the calipers are not binding. Furthermore, the buyer should examine the suspension bushes and coil springs for signs of splitting or corrosion, as these are common failure points on high-mileage Amaroks. Finally, verify the service book for evidence of timely oil changes and the replacement of the timing belt and water pump, as these are critical for the long-term mechanical integrity of the engine.