1997 Peugeot 106 1.4L Petrol · R627 BLE
1997 Peugeot 106 (1.4L, petrol). First registered 16 Oct 1997. Recorded mileage 52,868 miles. MOT expired on 08 Dec 2022.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 1997 · Reading
- Safety Recall
- Unknown
- MOT Status
- Expired on 08 Dec 2022
- Road Tax
- —
- Recorded Mileage
- 52,868 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.4L
- Reliability Guide
- Common Faults
AI-generated interpretation of this vehicle’s MOT record — not an official statement and not a substitute for an independent inspection.
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
R627 BLE Key Findings
- 2 MOT tests recorded
- Latest MOT passed on 09/12/2021
- 52,868 miles recorded at latest MOT
- 1 historical MOT failure
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
R627 BLE MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
2 MOT tests are recorded for this 1997 Peugeot 106 (R627 BLE) between December 2021 and December 2021.
The record contains 1 pass and 1 failure.
The most recent test on 09 December 2021 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
R627 BLE Mileage History
- 08/12/202152,868 mi
- 09/12/202152,868 mi
Average of roughly 0 miles per year across 2 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (R627 Series)
Vehicles registered in the same regional DVLA batch as R627BLE.
LAND ROVER
DISCOVERY
VOLKSWAGEN
TRANSPORTER
HYUNDAI
ACCENT
SUBARU
IMPREZA
JAGUAR
XK8
DUCATI
916
MERCEDES-BENZ
CLK
TOYOTA
COROLLA
HONDA
VFR800 FI
LAND ROVER
DEFENDER
MERCEDES-BENZ
E
HARLEY-DAVIDSON
XLH 883
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1997 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.