2023 KIA Sorento Edition Crdi AWD S-A 2.2L Diesel · RB19 LAD

The vehicle presents a clean MOT history with three consecutive passes recorded between 2024 and 2026, showing no recorded defects or advisories at any stage. This indicates a stable maintenance trend where the vehicle has consistently met the minimum legal requirements for roadworthiness. While the absence of advisories is a positive indicator of recent compliance, the lack of recorded defects means the MOT history alone does not provide a complete picture of the preventative maintenance or the mechanical condition of components that have not yet reached a point of failure. The recorded mileage of 107,715 miles for a vehicle of approximately three years is exceptionally high, averaging roughly 35,905 miles per year. This level of usage is significantly above the national average and implies heavy long-distance or motorway driving. While such usage can be beneficial for diesel engines as it helps prevent carbon buildup, it places substantial cumulative stress on the vehicle's mechanical systems. The buyer should be aware that high-mileage vehicles experience much faster degradation of consumables, including suspension components, braking systems, and drivetrain elements, which may require more frequent replacement than a standard domestic vehicle. Given the clean MOT record, the inspection must focus on the physical signs of high-mileage wear. During a test drive, listen closely for any knocks, clunks, or creaks from the suspension, which could indicate worn bushes, dampers, or coil springs. Pay particular attention to the All-Wheel Drive system; any vibrations through the floor or unusual noises from the drivetrain could suggest issues with the transfer box or differentials. Additionally, inspect the brake discs for signs of heavy wear or scoring and test the pedal feel to ensure there is no binding or sponginess, as the high frequency of use can lead to accelerated wear on calipers and pads. Finally, a thorough review of the service book is essential to confirm that oil and filter changes have been performed at the correct intervals to protect the CRDI engine from the effects of high mileage. Check the tyres for uneven wear patterns, which could indicate alignment or suspension geometry issues, and ensure the rubber is not perishing. It is also prudent to check the condition of the battery and the integrity of all fluid levels, including coolant and brake fluid, as the high thermal cycles associated with heavy use can impact their longevity. Verifying that any major scheduled maintenance, such as timing component inspections, has been completed is critical for the long-term reliability of this high-use vehicle.