2019 Land Rover Range Rover Velar 2.0L Petrol · SC08 AAA

The most recent MOT test conducted on 30 August 2025 resulted in a pass with no defects recorded. Looking at the broader history, the maintenance trend appears stable, although there was a notable dip in February 2024 when the vehicle failed on several braking components. The subsequent clean passes suggest that these issues were rectified and that the vehicle is currently being maintained to a satisfactory standard of roadworthiness. The recorded mileage of 49,321 miles over approximately seven years represents an average annual usage of roughly 7,046 miles. This is considered typical for a vehicle of this age and class. This moderate usage profile is generally positive, as it suggests the drivetrain and suspension components have not been subjected to excessive wear, while simultaneously avoiding the risks associated with long periods of standing, such as seized calipers or degraded seals. Prospective buyers should pay close attention to the braking system due to the major failures and advisories recorded in early 2024. The vehicle previously suffered from worn front and rear brake pads and heavily corroded front brake discs. While these were addressed to pass the MOT, you should verify whether the discs were fully replaced or merely cleaned. During a test drive, feel for any shuddering or pulsing through the brake pedal and steering wheel, which would indicate warped discs. Additionally, inspect the windscreen for the previously noted chip in zone A to ensure it has been professionally repaired and is not spreading. Beyond the MOT history, the age of the vehicle necessitates a check of the air suspension system and rubber consumables. Ensure the vehicle raises and lowers smoothly without audible leaks or hesitation. Inspect the tyre sidewalls for any signs of perishing or fine cracking, as rubber degrades over time regardless of the mileage. Finally, examine the service records to confirm that calendar-based maintenance, such as brake fluid flushes and engine oil changes, has been performed regularly to prevent internal corrosion and ensure the long-term health of the engine and hydraulic systems.