2011 Ford Fusion 1.4L Petrol · SL11 LUF
2011 Ford Fusion (1.4L, petrol). First registered 12 Apr 2011. Recorded mileage 164,107 miles. MOT valid until 26 Sept 2027.
- Make & Model
- FORD FUSION
- Year / Origin
- 2011 · Edinburgh
- Safety Recall
- Unknown
- MOT Status
- Valid until 26 Sept 2027
- Road Tax
- —
- Recorded Mileage
- 164,107 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 4+)
- Fuel & Engine
- Petrol · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
SL11 LUF Key Findings
- 22 MOT tests recorded
- Latest MOT passed on 22/09/2026
- 164,107 miles recorded at latest MOT
- 8 historical MOT failures
- 7 defects noted at the latest MOT
- Recurring brakes items (16 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
SL11 LUF MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
22 MOT tests are recorded for this 2011 Ford Fusion (SL11 LUF) between January 2014 and September 2026.
The record contains 14 passes and 8 failures.
The most recent test on 22 September 2026 was a pass, although the earlier record includes 8 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (16 issues), Lighting (12 issues), Suspension (8 issues), Tyres (6 issues), Windscreen (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 33 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Rear Exhaust emissions likely to be affected by an exhaust leak BOX SPLIT OPEN (8.2.1.1 (b))”; “Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))”; “Central Stop lamp(s) not working (4.3.1 (a) (ii))”.
SL11 LUF Mileage History
- 07/01/201415,854 mi
- 24/03/201526,089 mi+10,235 mi
- 29/03/201632,640 mi+6,551 mi
- 30/03/201632,650 mi+10 mi
- 14/03/201738,721 mi+6,071 mi
- 14/03/201738,727 mi+6 mi
- 10/10/201742,358 mi+3,631 mi
- 08/10/201855,539 mi+13,181 mi
- 08/10/201855,539 mi
- 08/10/201967,421 mi+11,882 mi
- 08/10/201967,421 mi
- 07/10/202075,831 mi+8,410 mi
- 31/08/202183,135 mi+7,304 mi
- 31/08/202183,135 mi
- 28/09/202290,054 mi+6,919 mi
- 12/09/2023113,725 mi+23,671 mi
- 12/09/2023113,726 mi+1 mi
- 10/09/2024119,063 mi+5,337 mi
- 22/09/2025140,074 mi+21,011 mi
- 23/09/2025140,074 mi
- 22/09/2026164,107 mi+24,033 mi
Average of roughly 11,667 miles per year across 21 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (SL11 Series)
Vehicles registered in the same regional DVLA batch as SL11LUF.
BMW
528
MERCEDES-BENZ
SLC 300 FINAL EDITION PREM A
NISSAN
NOTE
NISSAN
JUKE
NISSAN
PRIMASTAR
NISSAN
MICRA
NISSAN
QASHQAI
NISSAN
NOTE
NISSAN
MICRA
NISSAN
QASHQAI
SKODA
OCTAVIA
SKODA
FABIA
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2011 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.