2013 Mercedes-Benz A-Class 1.5L Diesel · SN63 DTY

An exceptionally clean record of roadworthiness defines this vehicle, as it has consistently passed its inspections without a single recorded advisory over the last several years. Although the records show failures in September 2024 and August 2025, these were resolved quickly to achieve clean passes, including the most recent test on 28 August 2025. This pattern indicates a stable mechanical condition where any emerging defects are addressed immediately to maintain DVSA standards. The recorded mileage of 108,900 miles over 13 years represents a typical annual accumulation of roughly 8,377 miles. This steady usage pattern suggests the vehicle has avoided the pitfalls of both extreme high-mileage wear and the degradation associated with prolonged periods of inactivity. Mechanically, the vehicle is at a stage where wear on primary consumables and rubber components is expected, but the consistent testing history indicates a stable trajectory of roadworthiness. Because the DVSA records show no specific failures or advisories regarding the chassis or braking system, the inspection should focus on verifying this clean state. During a test drive, listen for any knocking or clunking from the suspension bushes and linkages when traversing speed bumps, and feel for any steering pull or vibration that could indicate wear in the front-end geometry. Further attention should be paid to the engine and drivetrain, checking for oil misting around the seals and ensuring the gear transitions are seamless. A visual inspection of the underbody should be conducted to confirm the absence of corrosion on the subframe and brake pipes, ensuring the physical condition matches the clean MOT history. Finally, verify that the brake pedal remains firm and free of judder to confirm the integrity of the discs and calipers.