2014 KIA Venga 1.4L Petrol · SY14 LSN

The most recent MOT test conducted on 24 March 2026 resulted in a pass with no recorded defects, indicating the vehicle was in a roadworthy condition at that time. Looking at the broader maintenance history, the trend appears stable and improving. While the vehicle recorded advisories regarding tyre wear and perishing in 2022 and 2024, the subsequent clean MOT results in 2025 and 2026 suggest that these consumable issues have been addressed. This indicates a proactive approach to maintenance rather than a pattern of neglect. The recorded mileage of 27,208 miles is exceptionally low for a 2014 vehicle, averaging approximately 2,267 miles per year. While this suggests minimal mechanical wear on the engine, drivetrain, and suspension components, such low annual usage carries specific risks associated with vehicles that spend long periods stationary. Low-mileage vehicles are often subject to time-based degradation rather than wear-based degradation, meaning components may fail due to age and inactivity rather than physical distance travelled. During your inspection and test drive, you should pay close attention to items affected by infrequent use. Firstly, inspect the tyres thoroughly for sidewall cracking or perishing, as rubber degrades over time regardless of tread depth. Given the previous advisories for uneven edge wear, check for any signs of incorrect camber or toe settings by looking for irregular wear patterns on the current tyres. Secondly, test the braking system for any signs of binding calipers or excessive corrosion on the brake discs, which can occur when a car is not driven frequently enough to clear surface oxidation. Listen for any unusual noises from the suspension, such as clunks or knocks, which might indicate perished rubber bushes or seized components. Furthermore, verify the vehicle's service history to ensure that time-sensitive maintenance has been performed. Even with low mileage, engine oil, brake fluid, and coolant should be replaced according to calendar intervals to prevent moisture contamination and chemical breakdown. Check the condition of the 12V battery, as infrequent driving often leads to insufficient charging cycles and reduced battery health. Finally, ensure that all rubber seals, such as those around the doors and engine bay, remain supple and have not become brittle, which could lead to leaks or draughts.