2022 MINI Cooper S Electric Level 2 Electric · T22 EBK

A consistent track record of clean MOT results defines this vehicle's documented roadworthiness, with the most recent test on 01 December 2025 showing no defects. The absence of any recorded failures or advisories across the two available tests in 2025 indicates a period of stable compliance with DVSA standards. This lack of recorded mechanical issues suggests that the primary safety-critical components inspected during the MOT process, such as lighting, braking systems, and steering, have met the required thresholds without any noted degradation or minor wear. The vehicle has covered 25,393 miles over approximately four years, which equates to an average annual accumulation of roughly 6,348 miles. This usage pattern is consistent with typical low-to-moderate annual mileage for a modern electric vehicle. From a mechanical perspective, this level of usage suggests that consumables like brake pads and tyres may not have reached the same wear levels seen in high-mileage vehicles, though it also means the vehicle has not been subjected to the heavy, high-frequency mechanical stress associated with long-distance motorway driving. Because the MOT history contains no specific advisories regarding suspension bushes, brake pipes, or structural corrosion, there are no documented mechanical faults to investigate. However, as a prospective buyer, you should still perform a physical inspection of the underside to check for any signs of fluid leaks or unexpected corrosion that may not have been captured in the recent tests. On a test drive, pay close attention to the steering response and listen for any unusual knocks or vibrations from the suspension when driving over uneven surfaces, as these can be early indicators of wear in the bushings or dampers. Given the electric drivetrain, the focus during a test drive should remain on the smoothness of the motor's power delivery and the responsiveness of the regenerative braking system. Listen for any high-pitched whining or unusual mechanical noises that could indicate issues with the reduction gear or motor bearings. Additionally, verify that the vehicle maintains a straight line under light steering input to ensure the alignment and steering components are functioning as expected, despite the clean regulatory record.