2016 Peugeot 208 1.6L Diesel · VE16 AEX

The 2016 Peugeot 208 shows a stable roadworthiness trend over its MOT history, with no defects or advisories recorded in any of the five tests between September 2022 and September 2025. The most recent inspection on 22 September 2025—just under a year ago—confirmed the vehicle passed without issue at 84,045 miles, suggesting consistent compliance with UK roadworthiness standards. While the record lacks advisories, this does not guarantee undetected wear; it merely indicates the vehicle met minimum legal thresholds at each test. The absence of recurring failures on critical systems like brakes, suspension, or emissions implies either diligent maintenance or deferred attention to early warning signs. Mileage progression reveals a steady but moderate usage pattern, averaging around 8,400 miles annually over the past decade. The gaps between tests are precisely annual, aligning with the MOT cycle, and the mileage increments—ranging from 2,320 to 6,317 miles per year—suggest typical urban or commuter use without extreme wear. There are no red flags in the mileage data; however, the 2024 record includes a duplicate entry (two separate tests on the same date at identical mileage), which may indicate administrative confusion rather than mechanical issues. No periods of prolonged inactivity or rapid mileage accumulation are evident, though the lack of pre-MOT service records means deeper wear patterns remain unverified. Given the clean MOT history, priority should be given to inspecting high-wear components not directly tested under MOT regulations. The suspension—particularly rear bushes and coil springs—should be examined for excessive play or corrosion, as these are common failure points in vehicles of this age and mileage. Brake discs and pads, while not failed in MOTs, may show uneven wear or glazing; check for binding calipers or uneven pad thickness. The exhaust system warrants scrutiny for rust penetration at joints or underbody mounts, especially if the vehicle has seen wet or salted roads. Finally, the underbody and wheel arches should be inspected for structural corrosion, as this is often missed in MOTs but can compromise safety over time. The absence of advisories does not preclude these areas from requiring attention.