2015 Ford Focus 1.5L Petrol · WM65 ANF

A consistent record of clean MOT certificates defines this vehicle, with the most recent test on 03 December 2025 showing no defects. The testing history demonstrates a stable pattern of roadworthiness over the last eight years, as the vehicle has passed every annual inspection since 2018 without a single recorded failure. The only recorded advisory appeared in December 2021 regarding a deteriorated rear registration plate, a non-mechanical issue that was not repeated in subsequent tests. The vehicle has covered 73,190 miles over its eleven-year lifespan, which averages to approximately 6,654 miles per year. This usage pattern is consistent with typical annual accumulation for a vehicle of this age, suggesting a regular driving frequency rather than long periods of stationary use or high-intensity motorway mileage. From a mechanical perspective, this moderate mileage suggests that components such as the suspension bushes, coil springs, and braking system have been subjected to standard wear rates rather than the accelerated degradation often seen in high-mileage vehicles. Given the absence of recorded failures or mechanical advisories in the recent testing history, the inspection should focus on verifying that the components currently passing the MOT remain in good condition. While the MOT record is clear of issues regarding structural integrity or fluid leaks, a prospective buyer should pay close attention to the tactile feedback of the drivetrain and suspension during a test drive. Listen for any knocks or knocks from the suspension linkages when traversing uneven surfaces and check for any steering pull or vibration through the steering wheel that might indicate uneven tyre wear or worn steering components. The braking system should also be closely scrutinised to ensure there is no pedal judder or unevenness, which could indicate issues with the brake discs. Although no advisories for brake pipe corrosion or binding calipers have been noted in the DVSA history, the moderate mileage means it is prudent to verify that the braking performance remains consistent under various pressures. Overall, the documentation shows a vehicle that has maintained its required standard of roadworthiness without any documented mechanical setbacks.