2021 Volvo XC40 Inscript PRO T5 Rcharge A 1.5L Hybrid electric · WN 2046

The most recent MOT test conducted on 12 December 2025 resulted in a pass with no defects recorded, which is consistent with the clean pass achieved in December 2024. This indicates a stable and positive maintenance trend, suggesting that the vehicle has been kept in a good state of repair and has not exhibited any significant mechanical failures or safety concerns during its recent inspections. The absence of advisories in the last two years is a strong indicator of a well-cared-for vehicle, though it does not entirely replace the need for a thorough physical and service-history investigation. With a recorded mileage of 45,205 miles over approximately five years, the vehicle has covered an average of roughly 9,041 miles per annum. This level of usage is considered typical for a modern passenger vehicle in the UK and suggests a balanced driving profile. This moderate mileage is advantageous as it implies that wear on consumable items such as brake pads, discs, and suspension components like bushes and coil springs should be within expected parameters, avoiding the accelerated degradation often seen in high-mileage commercial or taxi-use vehicles. As the MOT history is clean, the inspection should shift towards age-related degradation and time-based maintenance rather than specific recorded mechanical faults. For a hybrid model like this Volvo XC40, it is vital to verify the condition of the 12V auxiliary battery and ensure the high-voltage system has been maintained according to manufacturer guidelines. You should also inspect the tyres for any signs of perishing or sidewall cracking, which can occur due to age even if the tread depth remains high. Check the brake discs for surface corrosion or pitting, which can develop if the vehicle has been stationary for extended periods, and listen for any signs of binding calipers or suspension clunks during the test drive. Finally, ensure that the service book contains evidence of regular, time-based fluid changes, particularly for the brake fluid and engine coolant, as these degrade regardless of mileage. During the test drive, pay close attention to the vehicle's braking performance for any shuddering and monitor the steering for any pulling or unevenness that could indicate tyre wear or suspension geometry issues. Confirming that all scheduled manufacturer services have been completed will be the most reliable way to validate the clean MOT record and ensure the long-term reliability of the hybrid drivetrain.