2016 BMW 320 2.0L Diesel · YG66 UBY

The vehicle currently presents a stable roadworthiness status following a clean MOT pass on 29 May 2026 at 92,337 miles. The maintenance trend shows a significant improvement after a period of neglect in early 2023. Since that failure, the car has undergone three consecutive annual tests without any recorded defects, indicating that the previous owner has addressed outstanding mechanical concerns and maintained a standard of upkeep. The mileage pattern is consistent with typical usage for a decade-old vehicle, averaging approximately 9,200 miles per year. There is a notable gap of 6,868 miles between the February 2024 and 2025 tests, followed by a more rapid accumulation of 10,496 miles in the final year leading up to May 2026. This suggests the vehicle is currently used regularly rather than sitting for long periods, which is generally beneficial for rubber components and braking systems to prevent seizing or premature perishability. A buyer should perform a physical inspection of the front suspension geometry, as the March 2023 failure highlighted perished offside brake reaction arm bushes. While these were rectified to achieve subsequent passes, high-mileage BMW components prone to wear should be checked for play in the control arm bushings. Given the history of uneven tyre wear and low tread depth in 2023, the current tyre set should be inspected for consistent wear patterns to ensure alignment remains correct and no further degradation is occurring.