2018 Ford Focus 1.5L Diesel · YM67 ABN

A consistently clean roadworthiness profile defines this vehicle, characterized by a near-total absence of recorded defects or advisories over several years. This stability is highlighted by the pass on 6 February 2024, which followed a brief failure just ten days prior, suggesting any identified issues were rectified immediately to maintain the vehicle's operational standard. The recorded mileage of 105,053 miles indicates a high annual accumulation rate of approximately 13,132 miles. This usage pattern suggests a history of long-distance travel, which typically results in less carbon buildup in the engine than city use but leads to accelerated wear on consumables and structural components such as wheel bearings, suspension linkages, and the drivetrain. During a physical inspection and test drive, focus on the tactile feedback of the chassis and drivetrain. Listen for knocks or rattles over speed bumps, which would indicate wear in the suspension bushes or coil springs. Check for any vibration through the steering wheel or a pull to one side at higher speeds, as these can be symptoms of worn steering rack components or uneven tyre wear associated with high-mileage vehicles. Assess the clutch for any signs of slipping under load and ensure gear changes are smooth and precise. While the MOT records show no specific failures, the mileage warrants a close inspection for oil misting around the engine gaskets and a check of the brake discs for significant lipping. Verify that the service history confirms the replacement of high-mileage interval items to ensure the vehicle remains mechanically sound beyond the basic requirements of a roadworthiness test.