2017 Ford Transit 2.0L Diesel · YM67 AAF

The 2017 Ford Transit presents a mixed but ultimately concerning maintenance history, with the most recent MOT record showing a pass just days before expiry on 30 December 2025 at 88,598 miles—yet this follows an immediate fail just ten days prior at 88,234 miles, with no defects recorded in either test. The absence of any advisories or defects across all five entries suggests the vehicle either passed with minor issues below the MOT threshold or that critical components were not thoroughly examined. The pattern of two consecutive fails in December 2023 at identical mileages (67,397 miles) further raises questions, as this repetition implies either a tester error or a recurring but undocumented issue that was not addressed. While the vehicle has technically passed its last two tests, the lack of any recorded faults—especially in a high-mileage commercial van—hints at potential neglect of routine checks or a history of last-minute repairs to meet test standards. The mileage accumulation aligns closely with the vehicle’s age, averaging around 9,844 miles per year, which is typical for a Transit used in light to moderate commercial service. However, the three-year gap between the 2023 and 2024 tests —where the mileage jumped from 67,397 to 77,018 (a 9,621-mile increase) without any recorded MOT—is unusual and suggests either prolonged private use or an extended period without testing. The most recent 1,580-mile gap between the 2025 fail and pass (88,234 to 88,598 miles) is negligible, reinforcing the suspicion that the vehicle was only tested when legally required rather than as part of a proactive maintenance schedule. This irregularity, combined with the absence of advisories, may indicate that the previous owner deferred routine servicing, particularly for wear items like tyres, brakes, and suspension components. For a prospective buyer, the lack of documented faults does not equate to a clean bill of health. Given the history of two unexplained consecutive fails and the sparse MOT records, a thorough pre-purchase inspection should prioritise brake system integrity , including pad thickness, disc condition, and caliper operation, as binding brakes are a common silent failure. The suspension—specifically control arm bushes, coil springs, and track rod ends —should be checked for wear or corrosion, as these are often overlooked in basic MOTs but critical for handling and safety. Structural corrosion, particularly around the sill sections, wheel arches, and exhaust mounts , must be inspected, as rust in these areas can compromise long-term durability. Additionally, the exhaust emissions system and lighting circuits should be verified, as these are frequently the cause of last-minute MOT failures. The absence of advisories in the records does not guarantee these areas are free from latent issues, making a professional inspection essential before purchase.