2010 Land Rover Freelander 2.2L Diesel · YR10 DFY

The vehicle is currently roadworthy, though the maintenance trend shows a pattern of recurring wear-related component failures. The most recent test in December 2025 at 162,367 miles passed with only a minor advisory regarding a cut nearside rear tyre. This represents a relative improvement over the 2024 and 2022 tests where suspension and steering issues were flagged. While the vehicle is passing its tests, the history indicates that mechanical components are reaching the end of their service life in intervals. At 162,367 miles over sixteen years, the Land Rover Freelander averages approximately 10,148 miles per year, which aligns with typical national averages for its age. The usage pattern appears consistent, with roughly 7,500 miles covered between the December 2023 and November 2024 tests, and another 5,500 miles in the following year. This steady accumulation suggests the vehicle is used regularly rather than sitting, which helps prevent premature degradation of the drivetrain and rubber components. A buyer must conduct a close inspection of the front suspension and steering, as the record shows repeated issues with suspension arm bushes, anti-roll bar linkage ball joints, and steering rack inner joints. The tester noted play in the steering rack in 2022 and worn bushes as recently as 2024, suggesting the front-end geometry is prone to significant wear. The offside rear wheel bearing was flagged with play in late 2024 and should be monitored to ensure it has not progressed toward a total failure. The braking system also requires attention, specifically the pitted and scored brake discs recorded in 2022. Additionally, the corroded power steering hose noted in 2022 should be checked for leaks. Given the age and mileage, a thorough check for structural corrosion on the chassis and mounting points is essential, as the MOT record does not detail deep surface rust. The recurring failures of rubber and metal joints indicate that this vehicle requires proactive maintenance to maintain its current safety status.