2022 Sherco 300 ST Factory 0.3L Petrol · CF71 XXV

The Sherco 300 ST Factory currently maintains a clean roadworthiness status, evidenced by the most recent MOT pass on 7 March 2026. This test resulted in no recorded defects or advisories, indicating that the machine met all statutory safety and environmental standards at the time of inspection. The lack of historical failure data suggests a stable condition, though the single data point provides a limited window into the long-term mechanical health of the trial bike. The official record contains no mileage data, which is typical for this category of off-road competition motorcycle. Because these vehicles are frequently used in closed-course environments or private land, the absence of odometer readings does not necessarily indicate tampering or neglect. The current MOT status confirms the bike has been presented for road-legal certification recently, which serves as a positive indicator of the owner's commitment to maintaining its registration status. Prospective buyers should focus their physical inspection on the high-wear components inherent to the Sherco platform, specifically the linkage bearings, swingarm pivots, and headstock bearings, as these often bypass the standard MOT check. While the recent test confirms the functionality of lights and basic chassis integrity, you must inspect the brake fluid condition and the state of the hydraulic clutch, as these are critical for competition performance. Check the frame for stress fractures or signs of recent welding, particularly around the engine mounts and footrest brackets, to ensure the structural integrity remains uncompromised despite the clean bill of health from the recent test.