2026 Ford Transit Custom 340 Trnd Phev A 2.5L Hybrid electric (clean) · CU26 EUT

The absence of any recorded MOT results for this 2026 Ford Transit Custom 340 TRND PHEV means there is currently no documented evidence of the vehicle’s roadworthiness, nor any indication of past failures or advisories that could help gauge its mechanical reliability. Without a pass or fail on file, the prospective buyer cannot rely on an official compliance history to infer the state of critical systems such as brakes, suspension or emissions. Mileage data is also unavailable, so a comparison of annual kilometre accumulation against the vehicle’s age cannot be made. The lack of odometer information prevents any assessment of wear patterns that would normally be inferred from typical usage rates, and it leaves the degree of component ageing entirely uncertain. Given the complete void of MOT and mileage records, a comprehensive pre‑purchase inspection is essential. Particular attention should be paid to the high‑voltage battery pack and its cooling circuit – look for any coolant leaks, corrosion around connectors, or warning lights indicating reduced state of charge. The electric drivetrain should be exercised under load to confirm smooth acceleration and consistent regenerative braking, while the conventional diesel engine (if present) should be checked for abnormal noises, oil leaks or excessive exhaust smoke. Inspect the brake system for any signs of fluid seepage, uneven disc wear or binding calipers, and verify that the suspension components – especially the front lower arms, bushings and coil springs – are free of excessive play or creaking. During a road test, monitor the steering for any pull to one side, feel for any judder in the brake pedal, and listen for knocks or rattles over bumps that could signal worn suspension or chassis rust. Ensure all dashboard warnings clear after start‑up, and confirm that the auxiliary electric functions (lights, wipers, climate control) operate correctly. A qualified technician should also perform a diagnostic scan of the vehicle’s electronic control units to capture any stored fault codes that are not visible on the instrument panel, providing a clearer picture of the vehicle’s true mechanical condition before any purchase decision.