2016 Renault Clio 1.1L Petrol · CU66 ORC

The 2016 Renault Clio presents a stable and improving mechanical trend, culminating in a clean pass at its most recent MOT on 19 November 2025 at 40,662 miles. The tester recorded zero defects, indicating the vehicle met all required safety and emissions standards without requiring any remedial work. A prior test on 8 November 2023 at 30,244 miles shows a failed outcome, though notably no defects were recorded for that specific failure, suggesting an administrative abort or testing equipment issue rather than a mechanical fault. The subsequent retest on the same day at 30,246 miles passed cleanly, confirming the vehicle's structural and mechanical integrity remained sound. The mileage accumulation aligns with light usage, averaging roughly 4,066 miles per year over the vehicle's ten-year lifespan. Between the 2022 test at 26,245 miles and the 2022 pass, the Clio covered approximately 4,000 miles annually, a figure that remained consistent through the 2023 and 2024 tests at 30,246 and 35,482 miles respectively. The 2025 test recorded 40,662 miles, showing a slightly higher accumulation of 5,180 miles over the preceding twelve months. This low annual mileage often indicates short, stop-start journeys or prolonged periods of inactivity, which can affect battery health and tyre condition despite the low odometer reading. Despite the absence of recurring mechanical advisories on the MOT record, the low mileage and potential for prolonged standing warrant a focused physical inspection. Buyers should closely examine the tyre sidewalls for cracking or perishing, as rubber degrades with age and lack of use rather than tread wear. The braking system requires scrutiny for surface corrosion on discs and binding calipers, common issues on vehicles that sit stationary for extended periods. Suspension components, particularly bushes and shock absorbers, should be checked for deterioration that can occur even without high mileage. A thorough assessment of the exhaust system and underbody for corrosion will confirm whether the lighter use has preserved the structural integrity or if environmental exposure has taken its toll.