2016 Mercedes-Benz Vito 1.6L Diesel · DF66 AEY

The most recent MOT history for this 2016 Mercedes-Benz Vito demonstrates a stable roadworthiness trend, though the final test date of November 2025—just six months prior to today—confirms the vehicle remains within legal limits. The single failure in late November 2025, despite no recorded defects, suggests either a minor administrative oversight or a transient issue (such as a temporary sensor malfunction) rather than a recurring mechanical flaw. All prior tests from 2022 to 2024 passed without fail, indicating consistent compliance with MOT standards over the past four years. The absence of advisories or repeated faults implies that major components—such as suspension bushes, coil springs, or critical brake systems—have not been systematically neglected. The recorded mileage progression reveals a steady accumulation of approximately 6,800 miles annually, which aligns with typical usage for a vehicle of this age. The gap between tests remains consistent at one year, with no abrupt spikes or prolonged periods of inactivity. For instance, the mileage increased by roughly 9,400 miles between the November 2023 and October 2022 tests, and another 10,000 miles between November 2024 and November 2023, suggesting regular, moderate use without extreme wear patterns. There is no evidence of prolonged storage, which could have accelerated corrosion or degraded fluid systems. Given the clean MOT record, a prospective buyer should prioritise a thorough inspection of high-wear components that are not directly tested during the MOT but are critical to long-term reliability. Focus on the suspension geometry, particularly the condition of the rear axle bushes and track rod ends, as these are prone to gradual deterioration over 68,000 miles. The brake system warrants close examination, including rear caliper binding (a common issue in Vitos) and the integrity of brake discs for uneven wear or glazing. Additionally, inspect the exhaust system for signs of corrosion or leaks, especially around flanges and joints, as this model is susceptible to rust progression in wet conditions. Finally, verify the integrity of the differential and transfer case seals for leaks, as these are often overlooked but can lead to catastrophic failure if neglected.