2010 Honda Insight 1.3L Hybrid electric (clean) · DFZ 7005

This vehicle presents a remarkably consistent roadworthiness record over its sixteen-year lifespan, maintaining a clean pass status across all four recorded tests with the exception of a single advisory on the front tyres during the most recent inspection in March 2026. The absence of any failures or major defects in the intervening years, particularly the two consecutive years of clean passes prior to the latest test, indicates a stable mechanical condition regarding the chassis, brakes, and emissions systems. The March 2026 test result confirms continued roadworthiness, though it flags the state of the front tyres as requiring attention rather than a mechanical failure. With an accumulated mileage of 81,760 miles over approximately sixteen years, the vehicle has an annual usage rate of roughly 5,110 miles, which is considered low for a car of this vintage. This low annual accumulation suggests the vehicle has likely been used sparingly, potentially as a secondary vehicle or kept in storage for extended periods, resulting in reduced wear on high-mileage components such as the engine internals, clutch, and drivetrain. However, lower mileage does not guarantee mechanical perfection, as components like rubber suspension bushes, brake pads, and tyres can degrade over time simply due to age and exposure to environmental factors, regardless of distance travelled. Prospective buyers should prioritize the visual inspection of the front tyres, specifically checking for any signs of cracking, perishing, or structural damage to the sidewalls, as the advisory notes indicate potential issues with both the nearside and offside front units. During the test drive, listen for any abnormal noises from the steering or suspension when turning corners or navigating over uneven surfaces, which could indicate worn ball joints or tie rod ends that may have been masked by the tyre condition. Additionally, given the vehicle's age and the low mileage, a thorough inspection of the brake discs and pads is recommended to ensure they have sufficient life remaining, as age-related corrosion can affect braking performance even if the vehicle has not been subjected to heavy braking loads.