2013 Nissan Qashqai 1.5L Diesel · FH62 YCB

The 2013 Nissan Qashqai presents a stable and improving maintenance trend, culminating in a clean pass at its most recent test on 18 October 2025 at 81,424 miles. The vehicle has passed its last three MOTs with zero defects recorded, indicating sound mechanical health and no recurring faults. A curious anomaly exists in the DVSA record where a failure and a pass are both logged for the exact same mileage on 18 October 2025, alongside a similar same-day fail/pass pattern on 29 October 2024. These likely represent aborted tests or administrative system errors rather than actual mechanical failures, given the absence of recorded defects. The lack of genuine advisories or failures across the history suggests the previous owner maintained the vehicle adequately. The mileage accumulation aligns closely with typical usage for a vehicle of this age. Between the November 2023 test at 77,999 miles and the October 2024 test at 80,114 miles, the Qashqai covered roughly 2,115 miles over twelve months. The subsequent year saw an increase of only 1,310 miles, reaching 81,424 miles by October 2025. This low annual mileage of around 6,200 miles overall indicates light, regular use rather than prolonged standing or high-mileage commuting. Such a pattern generally limits wear on major drivetrain components, though low mileage can sometimes mask issues like seized brakes or perished rubber components from lack of use. Despite the clean MOT record, a physical inspection remains essential to verify the structural integrity of the vehicle. Low-mileage vehicles of this age can suffer from deteriorated suspension bushes and perished tyre sidewalls due to age rather than wear. Inspect the condition of the brake discs and calipers for surface corrosion, a common issue when vehicles cover short journeys. Check the exhaust system for corrosion and ensure the coil springs show no signs of cracking. The same-day test anomalies on the DVSA record warrant a request for the physical test certificates to confirm no defects were missed during data entry. A thorough test drive will verify the condition of the clutch, gearbox, and steering components, ensuring the clean paperwork translates to a sound mechanical state.