2013 Vauxhall Antara 2.2L Diesel · FN63 VPC

The 2013 Vauxhall Antara presents a stable maintenance trend, culminating in a clean pass on 31 July 2025 at 95,167 miles with zero defects recorded. The vehicle passed its preceding test on the same date in 2024 at 89,334 miles, also without advisories. Anomalous entries exist for both 2024 and 2023, showing failures recorded on the exact same dates and mileages as the passes, yet noting no defects. These likely represent abandoned tests or administrative errors rather than mechanical failures, given the immediate clean passes recorded simultaneously. The current roadworthiness status appears sound based on the most recent valid inspection. The Antara has accumulated 95,167 miles over thirteen years, averaging roughly 7,321 miles annually, which sits well within typical usage parameters. The mileage progression shows consistent, moderate use: 83,877 miles in July 2023, rising to 89,334 miles by July 2024, and reaching 95,167 miles in July 2025. This equates to an average annual accumulation of approximately 5,600 miles over the last two recorded years, indicating slightly lighter recent use. No significant gaps or sudden spikes in mileage appear in the record, suggesting regular, steady driving rather than prolonged standing or high-mileage fleet usage. Despite the absence of recorded defects, a pre-purchase inspection must focus on common failure points for a thirteen-year-old SUV of this mileage. Examine the suspension bushes and coil springs for deterioration, as wear here often goes unflagged until severe. Check the brake discs and calipers for corrosion and binding, a frequent issue on vehicles used for short, low-speed journeys. Inspect the underbody and sills for structural corrosion, particularly around the rear subframe and mounting points. Verify the condition of the exhaust system and catalytic converter, ensuring emissions remain stable despite the clean recent tests. Assess the drivetrain for any excessive play or leaks, paying close attention to the rear differential and transfer case operation.