2015 Ford Focus 1.0L Petrol · HT15 FGA

The most recent MOT test for the 2015 Ford Focus was completed on May 5, 2026, and the vehicle passed without any defects recorded. This consistent passing trend suggests a stable maintenance record over the past five years, which is encouraging for a vehicle of this age. However, the DVSA history also reveals several advisories that warrant attention. Notably, there are multiple warnings related to tyre wear, including offside front and rear tyres worn near the legal limit and near the edge, as well as a nearside front tyre worn on the edge. These issues could indicate progressive tyre degradation or improper inflation, potentially leading to uneven wear patterns and reduced handling stability if left unaddressed. The recorded mileage of 62,925 miles places the car at approximately 5,720 miles per year, which is relatively low for a 11-year-old vehicle. This suggests the car has been used infrequently or has experienced periods of inactivity, possibly due to long-term storage or infrequent driving. While this mileage is not excessively high, it does raise concerns about the longevity of critical systems such as the suspension, brakes, and electrical components. The owner should be vigilant for signs of wear such as corroded suspension bushings, worn brake discs, or binding calipers that may not be immediately apparent during a standard test drive. For a buyer considering this vehicle, it is essential to conduct thorough pre-purchase inspections. Check the tyres for perishing patterns or uneven wear, listen for clunking noises from the suspension, and verify that all lights and signals are functioning correctly. The 12V battery should be tested for health, and fluid levels in the coolant, brake, and power steering should be inspected. Given the age and mileage, the seller should provide service book stamps and confirm regular maintenance intervals. If the advisories persist, they may need to be resolved before the car is deemed roadworthy. Overall, while the MOT history is clean, the mechanical implications of the tyre and component warnings should be carefully evaluated during the inspection process.