2014 Volvo XC90 2.4L Diesel · KF14 AUE

This Volvo XC90 has maintained a consistent MOT pass record with no defects recorded across all five tests, most recently passing on 4 March 2026 at 57,983 miles. The absence of advisories or failings over nearly two years suggests the vehicle has undergone regular, if not meticulous, servicing. However, the most recent test was conducted just four months ago, which is acceptable but not ideal—an MOT should ideally be renewed within the final month of its validity to ensure continuous compliance. The lack of any recurring issues implies the previous owner has likely addressed wear items promptly, though this does not preclude hidden or deferred maintenance. The recorded mileage of 57,983 miles over approximately 12 years—roughly 4,832 miles annually—indicates unusually light usage for a vehicle of this age. The gap between the October 2023 test (46,107 miles) and the July 2022 test (39,507 miles) shows a 6,597-mile increase in just nine months, which is still modest but suggests the car was not stationary for extended periods. The consistency of low mileage intervals could mean the vehicle was either stored infrequently or used primarily for short trips, potentially accelerating wear on components like suspension bushes and coil springs due to frequent low-speed operation. The longest gap between tests—16 months between March 2024 and October 2023—does not raise immediate concern unless accompanied by higher mileage accumulation, which it was not. Given the clean MOT history, a buyer should prioritise a thorough inspection of suspension components, particularly the coil springs and bushes, as low-mileage vehicles can still develop fatigue cracks or dry-rotting rubber. The brakes, while never failed, should be checked for uneven wear or binding calipers, especially if the vehicle has been stored with the wheels off the ground. Corrosion is another critical area—examine the wheel arches, sills, and subframe mounts for rust penetration, as even light usage can accelerate deterioration in exposed metalwork. The exhaust system and emissions should also be verified, as catalytic converter efficiency can degrade over time regardless of mileage. Finally, verify the service history for timely oil changes and fluid replacements, as these directly impact engine longevity and overall reliability.