2015 Mercedes-Benz V220 2.1L Diesel · KY65 LBX

The most recent MOT test for the 2015 Mercedes-Benz V220 was completed on 2026-06-09, resulting in a PASS with several advisories. The vehicle has shown a mixed maintenance trend over the past year, with one pass in June 2026 followed by a failed test in June 2026. The recurring issues point to potential concerns in the front suspension and lighting systems, which could affect handling and visibility if not addressed. The advisory regarding the oil leak suggests possible internal fluid loss, possibly from the engine or cooling system, warranting a thorough inspection of hoses, filters, and the oil pan during the next service. The recorded mileage stands at 170,663 miles, which translates to approximately 15,515 miles per year—significantly higher than the manufacturer’s recommended service intervals for this age. This elevated usage indicates the vehicle has likely experienced substantial wear on critical components such as the suspension, brakes, and drivetrain. The high mileage combined with the age suggests that regular maintenance checks are essential to prevent unexpected failures. It is advisable to inspect the tyre sidewalls for cracking or perishing, as this could compromise safety and performance. Additionally, the 12V battery should be tested for health, and any signs of corrosion or reduced capacity should be addressed promptly. For buyers who have not had a recent MOT, it is crucial to conduct a comprehensive physical inspection. Check the tyres for uneven wear patterns, especially near the edges, which may indicate alignment issues or excessive load. Listen for any clunking noises from the suspension, particularly when turning or accelerating. Verify that the brake discs are not excessively worn and that the calipers are functioning smoothly. The exhaust system should be inspected for any leaks or unusual sounds. Fluid levels, particularly oil and coolant, must be checked against service intervals. Given the vehicle’s age and mileage, proactive servicing and attention to these areas will be key to ensuring long-term reliability and compliance with safety standards.