2007 Maserati Coupe 4.2L Petrol · LS 7220

A recurring pattern of rubber degradation and emerging suspension wear defines the mechanical history of this vehicle, though it maintained a pass in its latest inspection on 2025-12-04. While the overall roadworthiness has remained stable, the record shows a persistent struggle with tyre integrity, ranging from perishing and wear in 2022 to a dangerous structural bulge in 2024 and more recent cuts to the nearside tyres. This trend suggests that while the car is legally roadworthy, its ancillary components are reaching a stage of age-related fatigue. The recorded mileage of 40,312 miles over nineteen years represents a very low annual average of approximately 2,122 miles. Such a usage profile typically indicates a vehicle that has spent significant periods stationary, which is corroborated by the 2022 MOT records of cracking and perishing tyres. Mechanically, this low-use history shifts the primary concern from drivetrain wear to the deterioration of rubber seals, bushings, and tyres due to lack of regular exercise and environmental exposure. Attention must be paid to the front suspension geometry and linkage, as the records highlight wear in both the lower shock absorber bushes and the offside front upper suspension arm pin. During a test drive, listen for knocks or clunks when traversing uneven road surfaces or during low-speed manoeuvring, and feel for any vagueness or instability in the steering alignment. The recurrence of tyre damage, specifically the cuts and previous structural failure, necessitates a close physical inspection of all sidewalls for any further bulges or deep abrasions. The braking system requires specific verification, particularly the handbrake, which was flagged for low effort on the offside rear in late 2024. Ensure the handbrake holds the vehicle securely on an incline and that the lever feel is firm and consistent. Given the history of perishing rubber and worn pins, a thorough check of all visible suspension bushes for cracking or separation is essential to ensure the vehicle handles as intended and to avoid imminent replacement costs.